which of the three sampling rates is required for optimum synchronization. Dual Concentric Control. Each channel of the DigiMax has a dual concentric rotary control for adjusting the channel�s gain (inner) and for selecting the dual domain limiter�s threshold (outer). Analog Output. The rear panel of the DigiMax contains analog impedance balanced outputs for each channel. These outputs provide an analog duplicate of the digital output of the unit. This duplication of the digital output allows the user to monitor the analog output with a mixing console and overcoming the �latency� problem (time delay) that may be encountered when trying to record in �digital�. Digital Optical Output. The DigiMax has a adat� lightpipe output that can be used with any commercially available digital optical cable. This cable can supply eight simultaneous outputs. Digital Output. The DigiMax has a chassis mounted 9 pin connector which can provide either AES/EBU or SP/DIF outputs depending on which model of cable is used as well as the internal configuration of the jumpers on the output card of the unit.
